BA-TS-2.5 (Micro JST)
• 2.5g (.088oz) servo
• Compact 19.6 x 16.2 x 8mm, 0.8 x 0.64 x 0.3"
• .12 sec 60deg.
• Torque @ 4.8V = 0.15kg/cm, 2.08 oz/in
• Micro JST connectors (see image)

Finally affordable ultra Light servos! Great for indoor and small park flyers! Please notice this does not have a full size connector. These are micro JST's used in many micro flight applications. They plug directly into the BA-R3P4-J reciever. If you combine these servos with another brand of reciever please verify the polarity of the wires before connecting. There are different pin orders depending on brands of equipment. The pins can be carefully switched. Failure to verify the wires are correct can cause damage to the servo and or reciever.

This servo will work with single-cell receivers like the Microbatics DSP-S3 and DSP-SB3, the Plantraco 900mhz servo receiver, JMP servo combo, or other sub-micro receivers. Also works with regular receivers like the Blue Arrow R3P4J-II. Note that the pin polarity is not compatible with Cirrus Micro Joule equipment - you will need to swap black and red wires for the Micro Joule receiver.